How to fix a black screen on your Crosscall Trekker-M1 Core
All the news on Crosscall Trekker-M1 Core in our articles.
How to fix a black screen on your Crosscall Trekker-M1 Core?
Today using a smartphone every day has become a habit in the lives of many users.
But it can happen to some people to see a black screen appearing in front of their eyes without their mobile having undergone any fall or damage.
The truth is, malfunctions on your Crosscall Trekker-M1 Core could sometimes happen, so do not worry.
In this article we will explain first how to repair a screen by performing manipulations without losing your data, then how to make a factory restart.
Eventually, we will show you how to back up your data on your Crosscall Trekker-M1 Core through third-party applications.
Our other articles on Crosscall Trekker-M1 Core can help you.
Repair the black screen of your Crosscall Trekker-M1 Core with a simple restart
Load your Crosscall Trekker-M1 Core
Your screen is black and your device will not turn on.
This problem can have multiple different reasons.
First, start charging your Crosscall Trekker-M1 Core for about 20 minutes.
Then try to turn it back on.
If this works then you no longer have to worry.
Remove the battery from your Crosscall Trekker-M1 Core
If the first manipulation gave no result, follow this chapter.
First, press the “On/Off” button on your Crosscall Trekker-M1 Core and see if your smartphone reboots.
If this does not work, then remove the battery from your Crosscall Trekker-M1 Core and then turn it on again to turn it back on.
It’s finish! This could have been caused by a poor connection of the battery.
Be careful though! In some new phones, the battery can no longer be removed as in older smartphones and it may be the case for your Crosscall Trekker-M1 Core.
Repair the black screen of your Crosscall Trekker-M1 Core with a factory restore
Your Crosscall Trekker-M1 Core still does not work after performing previous operations.
You only need to do this yourself: do a factory reset to restore your Crosscall Trekker-M1 Core. This will result in total data deletion on your smartphone.
Therefore, we strongly recommend that you back up your data first.
All the explanations concerning the backup of your data can be found in the next section.
Start by pressing the three buttons simultaneously: the top volume button, the Home button (located at the bottom of the unit) and the Power button.
During this operation, you will see a menu labeled “System recovery”. Once in this menu, go to “wipe data” using the volume buttons to navigate this interface.
Then go to “factory reset” and confirm your choice by pressing the “On/Off” or “Home” buttons.
After performing this operation, your Crosscall Trekker-M1 Core will perform a factory restore.
Let it restart and your device should normally work.
Retrieve data from your Crosscall Trekker-M1 Core using third-party applications
As your Crosscall Trekker-M1 Core displays a black screen and refuses to turn on, be prepared to retrieve data from your Crosscall Trekker-M1 Core to recover from this black screen issue. We strongly advise you to make a backup of your data in case you need to perform a factory reset and restore or your device.
First take your computer, go to the internet and type “Google Play Store” in your favorite search bar.
You will land on the Android Play Store site as on your Crosscall Trekker-M1 Core.
Next, search for “Data Recovery” and you will find a wide range of applications.
When installing one of these applications, the application will explain to you in detail what you have to do, so do not worry.
Be careful to look at all the notes and user reviews.
In addition, there are applications that are free and some will be charging you, so think carefully when making your choice.
If in doubt, do not hesitate to contact a technology expert to help you save your data on your Crosscall Trekker-M1 Core.
Consult an authorized service engineer for your Crosscall Trekker-M1 Core
If after all these different operations mentioned above your Crosscall Trekker-M1 Core still displays a black screen, we strongly advise you to go to an authorized repairer who will repair your device.
You can also visit the store of your telephone company that will support your Crosscall Trekker-M1 Core if it is still under warranty or if you have purchased insurance.
No worries, this type of problem happens frequently and if your Crosscall Trekker-M1 Core has not suffered a shock it should remain repairable.
What causes phone screen to go black?
The screen’s LCD connectors may be loose. There is a critical system error. You may have installed incompatible apps. The phone may have been overcharging for a long period of time.
Why my phone won t turn on?
There are several possible reasons why your phone won’t turn on, from battery failure to software issues. But most times you can narrow it down to a few common problems, including: A drained battery. Your phone may be unresponsive because the battery is dead.
How do I fix my black screen on my Android phone?
Power off the phone and then press and hold the “Power” and “Volume Down” keys until you see the Android logo. Ensure your device has a sufficient amount of battery power, if you try to reboot your phone with a critical amount of charge it may not turn on after the reboot.
CROSSCALL Trekker M1 Core – Waterproof and resistant smartphone – IP67 4G Smartphone – Unboxing
8 ancillary questions
What happens when your iPhone screen goes black but still works?
Force restarting your iPhone would fix the problem of iPhone screen black but still works. Hold down the ‘Home’ and ‘Sleep/Wake’ keys concurrently unless you see the Apple logo start appearing on screen. Un-hold the buttons and let your iPhone start.
Why did my iPhone screen go black and won’t turn on?
If your iPhone screen goes blank and does not respond, it could have a dead battery or it could have a more serious issue. You can try resetting the phone to see if it recovers and, if all else fails, contact Apple for a repair or a replacement.
Can you fix an iPhone with a black screen?
Quickly press and release the “Volume Up” button. Quickly press and release the “Volume Down” button. Long press the “Power/Side” button until you see the Apple logo displayed on your iPhone screen.
Why is my screen black even though its on?
We’ll look at some things that can cause a black or blank screen: Connection problems with your monitor or screen. Display adapter driver update issues. Issues with recent system updates or installations.
How do I fix my iPhone stuck on the black screen of death?
– Quickly press and release the “Volume Up” button.
– Quickly press and release the “Volume Down” button.
– Long press the “Power/Side” button until you see the Apple logo displayed on your iPhone screen.
What to do when your screen goes black but is still on?
– Fix connection issues with the monitor. Check the computer’s video cable for any external damage.
– Refresh the screen via Windows key sequence.
– Roll back the display driver/adapter (via Safe Mode) …
– Prompt a System Restore (Automatic Repair mode)
How do I reset my black screen?
– To wake the screen, use one of the following keyboard shortcuts: Windows logo key + P or Ctrl + Alt + Del.
– For a black screen, use the following keyboard shortcut: Windows logo key + Ctrl + Shift + B.
What do you do when your iPhone screen goes black but still works?
– Press and quickly release the volume up button.
– Press and quickly release the volume down button.
– Press and hold the side button until you see the Apple logo.
– If your phone doesn’t turn on, follow these steps to check your hardware and charge your phone.