My Wiko Pulp Fab 4G does not start or boot up

Home » Wiko » My Wiko Pulp Fab 4G does not start or boot up

All the news on Wiko Pulp Fab 4G in our articles.

My Wiko Pulp Fab 4G does not start or boot up

Do not worry, there are many solutions if your Wiko Pulp Fab 4G does not start or boot up.

In particular, we will see in this article solutions like hard reset, battery reset, solving interference with applications or even solving electrical problems.

Your Wiko Pulp Fab 4G may eventually be under warranty or could be repaired by a specialist.

Unplug your Wiko Pulp Fab 4G from any electronic device

If your Wiko Pulp Fab 4G is connected to a computer, internet box or other, then we strongly recommend that you unplug it.

Indeed, it is possible that software incompatibilities could prevent your Wiko Pulp Fab 4G from starting or booting up.

Our other articles on Wiko Pulp Fab 4G can help you.

In this case, the solution is simply to unplug the USB cable from your phone.

Remove the battery from your Wiko Pulp Fab 4G

Another possible solution is to remove the battery from your Wiko Pulp Fab 4G. This can be a simple and effective solution if you want to start your Wiko Pulp Fab 4G.

  How to use your Wiko K-Kool as a TV remote control

Factory restart under condition to start or boot up your Wiko Pulp Fab 4G

Restarting with factory settings allows you to re-establish your phone as if it had come out of its shopping box, from a software point of view. If you have accumulated viruses, or unwanted software, this may be a good solution to start or boot up your Wiko Pulp Fab 4G.

Refer to your manual to restore factory settings to your Wiko Pulp Fab 4G, or call a professional. This will ensure that the steps have been made rightly on this perspective.

Be careful though, you will lose all your personal data by doing this.

Be sure to make a backup beforehand.

Battery does not work on your Wiko Pulp Fab 4G

Battery fully discharged

If the battery is completely discharged, then there may not be enough power to start your Wiko Pulp Fab 4G. We recommend that you load your Wiko Pulp Fab 4G and wait patiently.

Once the charging gauge is at least at 20%, then you will be able to restart your phone.

Note that it is not recommended charging your Wiko Pulp Fab 4G using a USB cable connected to a computer or other electronic device.

Indeed, the load would be slowed down, and software interference or even a virus could spread to your Wiko Pulp Fab 4G.

Battery too old

Another problem on your Wiko Pulp Fab 4G may be that your battery is too old.

In this case, the only solution is to change it.

We advise you to go see a professional or test your battery on another Wiko Pulp Fab 4G before making a possible purchase of battery, sometimes expensive.

  How to remove keyboard vibrations on Wiko Pulp 4G

If all previous solutions do not work on your Wiko Pulp Fab 4G

Play your warranty

Your Wiko Pulp Fab 4G may still be under warranty.

Most of the time, it is important for this step to have kept your receipt.

Best is to go and see your dealer who will help you to start your phone.

Go to an authorized repairer for your Wiko Pulp Fab 4G

If you do not have a warranty, then it will be up to you to call a repairer.

We advise you to refer only to specialized repairers for your Wiko Pulp Fab 4G. Be sure to ask for a quote before committing yourself with a professional who may charge you.