How to configure connection sharing on Crosscall Spider-X4

Home » Crosscall » How to configure connection sharing on Crosscall Spider-X4

All the news on Crosscall Spider-X4 in our articles.

How to configure connection sharing on Crosscall Spider-X4?

Today you can have an internet connection including your Crosscall Spider-X4, which can be included in your telephone plan.

Although you may be able to purchase an internet key for your laptop when you are traveling, you may have another option that may be cheaper: modem mode or connection sharing from your Crosscall Spider-X4. This system available on your Crosscall Spider-X4 is widespread and very convenient especially when you need internet on your computer when traveling or when a friend urgently needs an internet connection.

That’s why we’re going to talk to you about this topic and how to share your connection from your Crosscall Spider-X4. We will explain how to set up modem mode on Crosscall Spider-X4 via Wi-Fi, using your USB cable and finally Bluetooth.

Configure modem mode on your Crosscall Spider-X4 via Wi-Fi

Before you begin this operation, make sure you are connected to your Wi-Fi network and that this connection works correctly to enable Wi-Fi connection sharing on your Crosscall Spider-X4. First, first go to the settings of your Crosscall Spider-X4 and then click on the section “Wireless and network” or “Wi-Fi”. Then press “More” where several actions will appear before your eyes.

On this section, click “Connection Sharing” or “Mobile Network Sharing” or “Connection Sharing and Mobile Access Point”, the title may vary depending on the version of Android installed on your Crosscall Spider-X4. Finally, simply click on “Mobile Access Point” where you will be able to configure your Wi-Fi hotspot from your Crosscall Spider-X4 by entering a password.

Our other articles on Crosscall Spider-X4 can help you.

  How to hard reset your Crosscall Trekker-S1

This will allow you to protect your connection.

When you connect your Crosscall Spider-X4 to your computer or to a friend’s mobile, the password will be required so that an outside person can not enjoy your connection.

The small plus of the modem mode by Wi-Fi is that you can rename the Wi-Fi connection of your Crosscall Spider-X4 so that it is easier to find.

Configure the modem mode on your Crosscall Spider-X4 using a USB cable

This method enables connection sharing of your Crosscall Spider-X4 via a USB cable connected to your PC. First, make sure your mobile networks are enabled for modem operation and connect the USB cable of your Crosscall Spider-X4 to your computer.

As in the previous section, the first steps are similar.

First, go to the settings of your Crosscall Spider-X4 where you will click on the “Wireless & networks” section.

Then, just click “Connection Sharing” or “Mobile Network Sharing” or “Connection Sharing and Mobile Access Point”, the name may vary as in the previous paragraph. It’s from here that things change in relation to the Wi-Fi mode.

Press “USB Connection Sharing”. You have finished sharing the connection.

With this method, you do not need a password because your Crosscall Spider-X4 is directly connected to your computer.

Warning ! Enabling mobile data and using it on a computer will cause a drastic drop in your data and dataset, so use Wi-Fi.

Configuring modem mode on Crosscall Spider-X4 via Bluetooth

We will finish this article by configuring the modem mode on your Crosscall Spider-X4 via Bluetooth. Before you begin handling, make sure that the Bluetooth of your Crosscall Spider-X4 is turned on.

  Wi-Fi problem Crosscall Trekker-X3

In addition, activate the Bluetooth of the device to which you want to share the connection.

As in the previous paragraphs, the first steps are similar.

First, first go to your Crosscall Spider-X4 settings and then go to the “Wireless & Network” section.

From there you will need to click “Connection Sharing” or “Mobile Network Sharing” or “Connection Sharing and Mobile Access Point”, the category name may vary.

And now choose “Via Bluetooth” mode.

Once here, you just have to choose one of the devices that appears in the devices activated by the Bluetooth then to associate the two devices.

It’s over, connection sharing has been established.

However, we recommend that you use this method only as a last resort because it does not emit as well as the other two methods.

If you encounter problems, do not hesitate to contact a specialist or a technology expert who can help you to share your connection and put your Crosscall Spider-X4 in modem mode.